Dears,
What’s the troubleshooting for high T7676: Average Forward Packet lOss Rate of IPPM
greater than 30%
I’ve many WCL suffers from this problem? wondering about solutions that could fix it?
ask your transmission guys to clear their part. Inform them of packet loss you’ve found.
especially if the transmission you are using in your network is microwave.
FIrst Xcheck with Ping Jumbo Pipe more than 1500 unfragmented
second xcheck MTU size all path
third xcheck BW setting from node–transmission–RNC
fourth xcheck autonegotiate between node & Transmission should same on both setting
If you don’t mind,
Could you share more details how to do your recommended checks
Dear,
Generally what’s the threshold to have bad IPPM.Forword.DropMeans
Dears,
Urgent request, please
Which counters you are using to check Transmission quality that can impact radio KPIs
VS.IUB.FlowCtrol.DL.Drop.UpBW.Num.LgcPort1
VS.IUB.FlowCtrol.UL.Drop.UpBW.Num.LgcPort1
VS.IPPATH.PING.MaxLOST
IPPM counter if u activated it
ask your transmission guys to clear their part. Inform them of packet loss you’ve found.
especially if the transmission you are using in your network is microwave.
FIrst Xcheck with Ping Jumbo Pipe more than 1500 unfragmented
second xcheck MTU size all path
third xcheck BW setting from node–transmission–RNC
fourth xcheck autonegotiate between node & Transmission should same on both setting
If you don’t mind,
Could you share more details how to do your recommended checks
Dear,
Generally what’s the threshold to have bad IPPM.Forword.DropMeans
Dears,
Urgent request, please
Which counters you are using to check Transmission quality that can impact radio KPIs